kamisfx
12/19/2021
Reply
Hi there, i bought the anatomically correct male, but then found that it doesnt get hard. is there any way to exchange this for the unrestricted version that does?
chvenki2009
7/4/2021
Reply
I have purchased BB Ez Light control, The plugin is not appearing in iclone Plugin tab, Pl resolve the problem. chvenki2009@gmail.com
Mentalman
5/25/2021
Reply
Hey,
First off love your work. I wanted to know if you could create me a human brain with eyes, nose, and mouth? Like your fruit characters. If so, how much and what would be the turn around time? Thanks you can also reach me at badmationproductions@gmail.com.
teamshutupandtrain
3/18/2021
Reply
Hey Bigboss,
I was wondering if you still offered the anatomically correct male and female anatomically correct packs? If you do, which ones of each would you recommend? I seen their were different versions and I am little confused at which ones offer the best options. Which male pack and female pack is the best option? Thank you
Spiny Norman
2/21/2021
Reply
I have just bought crickys water tiles and love it, but is there any way to calm down the water movement? Thanks in advance. Spiny Norman
Bigboss
2/21/2021
Reply
Good morning, This prop works based on how your Soft Body Physics are set. Keeping your World Scale Low (1, 2, 3,etc.) and a constraint stability scale of (3) or Greater will give you better results. Cheers.
andyraul
9/16/2020
Reply
hi , today finally I could add the plugin I bought BB EZ Lighting Wizard v10. from you and I got my refund . so please tell me what Can I do to pay you back your product ? Or you can get my points from my DA .... Sorry for the inconvenience
cynsegura
8/21/2020
Reply
Hi big boss, I see you have in the market place lot of toon animals which are super nice one. But are all G5. Is it anyway to use those heads in character creator 3 characters to they work for caption motion with mockup? Please let me know thanks!!
Bigboss
8/21/2020
Reply
Unfortunately not. The G5 cvharacter are not compatible with CC. However, if you check carefully, some animals are CC and others are G5 so most latest ones are CC compatible but not al of them. Cheers.
TheoBot
8/3/2020
Reply
Hi, I have purchased your EZ Books Animated Storybook. Do you have any tutorial and instruction on how to customize?
TheoBot
8/4/2020
Reply
Thank you very much.
Bigboss
8/4/2020
Reply
You can extend or cicle animation clips by selecting the prop, opening the timeline, display the animation clips, selecting the animation clip you want to extend and drag the boundary to the right or activate the Repeat Cycle button and drag to the right... this is a bit complicated so you will need to view a few tutorial on how to use the timeline in iClone. Cheers.
TheoBot
8/4/2020
Reply
Thank you very much for taking time to respond. I am new to iClone. I am still learning. I have one more thing to ask of you. I also bought the small hordes Sheep. How do I have it to animate beyond its normal duration?
Bigboss
8/3/2020
Reply
Good evening. Unfortunately I do not have a tutorial but it is fairly simple. You can use any tutorial on Reallusion site explaining how to edit textures. There is one texture for each page and backpages you can edit. There is also a separate texture for the book cover page. Simply select the right material file and edit in Photoshop or replace the texture file using drag & drop of an image on the page. Cheers.
andyraul
8/1/2020
Reply
Sorry to bother you one more time but, i just bought BB EZ CAM Controller Plugin and it happened the same does not show up in my plugin tab bar .. it seems your plugins is comparable with my iclone .. I tried everything coping paseting but no result so. this time I need my money back . Thanks and Isorry about this matter . I spend hundreds and hundreds dollars buying from reallusion and I never have problems downloading their items
cally.wolk
7/23/2020
Reply
Hi...I just bought your stylish beards pack, installed it, but it doesn't show up in either character creator or iclone. Where can I find it? Thanks. crwolk@gmail.com
Bigboss
7/23/2020
Reply
They will be in the \Underwear\BB\ folder like underwear Cloth.
Cheers!
andyraul
7/15/2020
Reply
hi. Ijust Bought this BB EZ Lighting Wizard Plugin but it does not appears on my Iclone , Can You Please Help me with this matter ? this is the w/o 637303625483772593 Thanks....
andyraul
7/17/2020
Reply
Well . I delete my program and re-installing it but nothing , so please instead of . I want to exchange this : BB EZ Gears Mechanical Drive Construction Kit . Sorry if I cost you any inconvenience with this matter …
Bigboss
7/16/2020
Reply
This is really strange since it works for me and all my plugins operate the same way. Anyway I have no problem in giving you another product from bigboss if this does not work for you. Just make sure you Copied "BB EZ Lighting Wizard" folder to you iClone Bin64 OpenPlugin folder
e.g. C:\Program Files\Reallusion\iClone 7\Bin64\OpenPlugin. On my side, I will download it and install again just to make sure I did not screw up during the upload. Let me know what product you want in exchange
andyraul
7/16/2020
Reply
I down loaded it and I unzipped it . as I always do , but this is the only item is cost me trouble to get it. is there a way to get my money back ? or change the item for another ?
Bigboss
7/15/2020
Reply
All you should need to do is unzip the download and copy the BB EZ Lighting folder to the iClone plugin folder. Can you send me the path where you copied the folder.I can be reached directly at bigboss40@videotron.ca. Thanks.
andyraul
7/15/2020
Reply
Hi... it does not appears in plugin tab After I download and I restart my computer many times . What Can I do next ????? Do I have to delete the program and re-Install it again?
Bigboss
7/15/2020
Reply
Good morning, do not worry. Assuming you copied the folder to the proper iClone folder as described in the product promo sheet. When you restart iclone, you will not see the panel. To open the panel, you need to go to the Plugin TAB, look for BB Plugins in the Pulldown menu and you will see the BB EZ Lighting option there. Select the BB EZ Lighting from the menu and the panel will open.
primalemotiongames
6/25/2020
Reply
Hi!
You had some time ago the anatomically accurrate humans alongside some sliders for genitalia and others, on Reallusion's store but that specific package is not available for purchase anymore. Any idea on how can I purchase it, or if you have a newer version witch has the controls for morphing the genitalia especially?
Thank you very much!
freddyboutros7
6/24/2020
Reply
BB CC3 Anatomically Accurate Male Base Style30 LITE American - Does this work with Character Creator 3.0 or do I need IClone?
Bigboss
6/24/2020
Reply
This is a CC3 character. It works with Character Creator and you do not need iClone. Cheers!
Mapleblade
6/18/2020
Reply
Your new version of CC3 Anatomically female/male base has no sliders. Are you still selling the old versions with sliders ? And I saw you had something like natural erotic animation before, is it still for sell ?
jsinger
5/28/2020
Reply
I have a production that includes numerous contemporary African characters of all ages and genders. Neither Marketplace nor Reallusion store has contemporary styles. I'd want these clothes for iClone 7 and/or Character Creators characters. Modern Africa is far more than half naked villagers with spears and boobs hanging out.
wink3319
5/15/2020
Reply
Hi Bigboss!
I have purchased the package JCCcf9a47d34cac8acc9 ("BB CC3 Cloth Anatomically Accurate Female Base Style_30 American") a while back. I have seen that you have issued a new product recently with pretty much the exact same title. What is the difference? What is the benefit of getting the new title.
I want to use the product in UE4. Basically, I think this should work. However, I want to use it with different skin types (e.g. black skin, latina skin, pale skin). How can I do this?
LogicalWarrior
4/30/2020
Reply
Hello, are you still selling your male and female anatomically correct avatars? For some reason, everything is either grayed out, or it's saying I need to purchase base, but it's not available. I'm trying to do a "SPECIAL HORROR" short film request project, but I need a full nude male and female character with genitalia included. Even if you can just make the parts themselves with the morphs/animations available standalone, that would be even better! Please help!! Thank you in advance! LW
VRDollz
4/24/2020
Reply
Thank you for your reply I have sent you an email :)
VRDollz
4/23/2020
Reply
Hello there, Thank you for providing this much needed content, I appreciate it:) I am new to this but trying to learn by doing tutorials. I have bought some of your Anatomically Accurate Female Bases,they are beautiful ty. but when they animate in iclone they get a black dotted line/splitting along the where the upper and lower mesh joins the body? Is this a problem that happens or am I doing something wrong?
Bigboss
4/23/2020
Reply
This is not normal. You should not see the line if you are running the characters provided wit the pack. if you instead apply the genital cloth to other characters, then you might see that line because you need to hide the polygons that are under the genital parts and this is a technically complex procedure. If you are using the characters as they were delivered, and you see this black line, this is not normal. you can send a pic to me at bigboss40@videotron.ca so I can see the problem. Cheers!
kenmatthews
4/19/2020
Reply
Hello Big Boss, to put you in the picture, I'm trying to animate a film of one of my books, 'The Santa Stone' (Kenneth J Matthews). The opening scene is Santa and his sleigh being attacked by giant Condors (probably end up as eagles...) I have put the sleigh, reindeer and Santa together and attached the deer to the sleigh with a harness, unfortunately I now seem to have lost the walking (etc) animation from the deer. Could you tell me what I'm doing wrong please? Best regards. Ken
kenmatthews
4/6/2020
Reply
Hello Bigboss,
I bought your "Gwynn's Children" and I'm very happy with the product apart from one thing which I hope you'll be able to advise me... The colour of the boys skin is very grey and it is detracting from my project, can you help me please? Best regards. Ken
Ken Matthews
kenmatthews@blueyonder.co.uk
kenmatthews
4/6/2020
Reply
Thanks Bigboss I'll try that. Best regards. Ken
Bigboss
4/6/2020
Reply
Good Morning Ken, I hope you are well. In previous iClone versions, you were able to adjust the skin tone on G5 characters but now, this is only possible for CC characters. What you can do is this: In Modify Panel Materials Tab, select RL_SKIN materials and adjust the diffuse color until you get the results you want. You will need to do the same changes for all body parts (Hands, Face, Lower, Upper and Shoes where you see RL_Skin material name applied. Hope this helps.
billh1986
3/7/2020
Reply
I think I figured it out. What I bought are only cosmetic without any morphs and I need the Base versions. Any update on when or if the marketplace will allow them to be sold?
billh1986
3/7/2020
Reply
I may be doing something wrong. I've purchased all CC3 Anatomically correct packages. I can load the character in CC3 and the genitals are there but no morphs. When export to iClone, no animations.
michaelVL
2/22/2020
Reply
Hi, I was wondering if I could contact you through email or something because I'd like to see a preview of your anatomically correct packs since I suppose previews can't be posted on here. Also, I don't think I have iClone, only CC, can I use the pack in a typical way using morphs?
samtron
2/21/2020
Reply
cc Cloth Anatomically Accurate Female Base Style 1
Is this a cc3 character with adjustable genitals ???
Does that work with headshot ???
OnceUponATimeInTheWorld
1/31/2020
Reply
Hi,
where do i find "CC3 anatomically correct male" ??
Bigboss
1/31/2020
Reply
I had to take it out of the marketplace because it was not compliant with RL EULA. I am awaiting for clarifications from RL on what I need to change to allow the sale. Apologies. This is outside my control.
thinkvirtualgames
1/26/2020
Reply
Hello Bigboss. Right click on what? Thx
Bigboss
1/26/2020
Reply
While the BB Base Penis sub-prop is selected from the scene manager menu, right click anywhere in the scene and you should see a Pop-up menu with the different animations that are available for the penis, select the Erec Penis Animation. Cheers.
thinkvirtualgames
1/24/2020
Reply
Hello Bigboss. The animations for the pns for CC3 anatomically correct male cannot be applied. Was there a step missed? Is there any way to have them as blendshapes? Thanks
Bigboss
1/24/2020
Reply
Good evening. Try this: 1) Explode avatar in Scene manager to see sub-props. 2) Select BB Base Penis sub-prop 3) scroll down modify menu and deactivate penis springs 4) Right click and select Penis Erect performance. The penis erect is not a blend shape because by using bones, I can activate the springs when non-erected.
Cheers.
gunnaphergando
1/10/2020
Reply
I have so many other ideas after the jiggle stuff as well. Because I'm always in need of additional things for my content. I am satisfied with the skin textures especially after the update. I'm totally digging the micro normal and skin pores. As I have a fetish for skin pores and details in such. Only other thing I could think of are peach fuzz for the skin and tiny body hairs. And adjustable skin pores to create gooseflesh and strawberry skin. I love those too.
Bigboss
3/26/2020
Reply
There is no progress on this front as there are technical constraints in iClone I cannot solve and also it is currently prohibited by the EULA. Sorry
gunnaphergando
3/25/2020
Reply
Hey, I've been waiting to see what all you could come up with. Any progress? I'm still in need for those jiggles mon. ;)
gunnaphergando
1/11/2020
Reply
Best bet would be to make several morphs to create the illusion of jiggling. If that's the case. I wish they had softbodies. Like blender has for that purpose. then I could make anything jiggle. They seriously need to step up their physics options for body animations.
Bigboss
1/10/2020
Reply
The G6 characters had 2 bones each side of the hips for that. Originally, I though I could use them and apply springs to them but unfortunately, RL removed those bones in the CC characters skeleton. I tried to find away to use the Breast bones but that will not work. Animating morphs would be possible but it would be a real pain for the user to set the animation and I am not sure what shape to give the morphs? ...
tyii
1/8/2020
Reply
Hello. I purchased (BB CC3 anatomically accurate DH male base American style 30) what I received was a trial version, apparently because it is derivative content which needs (BB cc3 nude male genitals) to work, however even though the genitals are listed in the marketplace for 1000 points, they do not sell it. So how do I get the BB cc3 nude male genitals so that my anatomically accurate DH male base American style 30 will no longer appear as "trial" content with a watermark?
Bigboss
1/9/2020
Reply
Thanks for the information. I can surely make the jiggle. The issue is that I cannot make it compatible with iClone motions and CC because I need to change the skeleton for the jiggle to work and I am not sure if people will buy the product if it has those limitations. Cheers.
tyii
1/9/2020
Reply
By the way, and I don't know if it helps any at all, maybe for a point of reference, but I have seen one game that got the jiggle right called "Skyforge" perhaps there data could help you out. At any rate I look forward to seeing what you come up with.
Bigboss
1/9/2020
Reply
The tongue morphs are packaged as Morphs you can animate on the timeline in iClone using the characters provided with the pack. To be able to use them on the DH_0 Base, I need to generate them and embed them in the DH_0 Male and Female. I will either provide an upgrade or 2 new characters altogether, like a style_31. This is actually a lot of work as there are many morphs... Thinking about it... :) The jiggle thing is a required feature but I have not been able to find a solution yet in CC3.
tyii
1/8/2020
Reply
Yes, everything seems to work fine now thank you. I have another question, I also bought your cc cloth tongue morphs and want to use them with the anatomically accurate DH characters, is this possible? and if not will it be at some point? Also I read where someone mentioned that you have, or are working on body jiggle. If so I am interested in getting it as well.
Bigboss
1/8/2020
Reply
Apologies. I got mixed up when I build the pack. I added the missing element to the pack. You should be able to download it again, install and the watermark should be gone. Please confirm to me if all OK because I need to inform other buyers. Thanks.
gunnaphergando
1/6/2020
Reply
Yoooo,
still waiting on that jiggly ass and thighs. I have so many characters that I made and can't wait to get them animated with the jigglyness all around. I hope that with your feature that I will be able to make any body part jiggle. Using the spring bones or whatever way you find to get them working. I look forward to this. Thanks, Gunnapher
gunnaphergando
1/10/2020
Reply
I wish reallusion changes this and allows springs for all body parts instead of only breast. Makes no sense why they haven't updated this yet. I even bought the Iclone exchange 7 as I waited to see if I could get them to jiggle myself. And to no avail. No results were made. I even tried adding new spring to the bones but it glitched out so bad. That it was useless. Watched a few tutorials on using morphs to attain jiggles. Still...nothing. Only hope I have is you for now.
gunnaphergando
1/10/2020
Reply
Okay, How this would work would be...I know that I will need to edit this character. That's a must because I will be using her and the new headshot plugin. And also, I need her to be in different body shapes. Mostly voluptous. Big ass and thighs of course. The only clothes she would mostly be wearing are bikinis. String bikinis and thongs. And all her jiggles must be adjustable. For light jiggles to heavy. Because some will require more than others. And they will mostly be naked anyways.
Bigboss
1/10/2020
Reply
Good morning gunnaphergando, I did a number of tests and adding giggling while retaining CC compatibility is not currently possible because I would need to change the skeleton of the character. The only opton is to create a non-standard character for iClone which means you would not be able to edit in CC nor add costumes. I put this on standby for now because I am unsure if customers would buy a character with such limitations? What do you think?
gunnaphergando
12/24/2019
Reply
Bought the digital human male with genitals. But disappointed. The gential skin areas is missing the SSS,Blend map and Micro Normals. Dissapointing. And you can see the seems. I tried everything and it just is flat pbr shader. Nothing more. Everywhere else is fine though. It's just his penis, pelvis and butt area. You can see it in the right lighting.
gunnaphergando
12/24/2019
Reply
Just bought the male DH with genitals. Now all I need is the jiggle system. YESSSS!
gunnaphergando
12/20/2019
Reply
We need a new update for all anatomically correct females and males with the new updated realistic skin and sss makes it look totally out of place. I tried using the new skin but your Anatomically correct charcaters don't have realistic textures since the new update.
gunnaphergando
12/22/2019
Reply
It's still not working with the new Headshot plugin I bought. It defaults back to standard DH character. No genitals. Just underwear. Wish your DH anatomicallt correct characters worked with the Headshot plugin.
Bigboss
12/22/2019
Reply
Good morning. I am updating all Style_30 characters to the new Digital Skin and also releasing a new Male and Female for the 2 new DH characters. So you will be able to download the previous characters with Digital Human Skin.
gunnaphergando
12/22/2019
Reply
Both male and female right???
gunnaphergando
12/22/2019
Reply
So it's a possibility of getting it to work? Or should I buy the new one you have instead?
gunnaphergando
12/22/2019
Reply
Okay. So far is it coming out well??? Can't wait to see this at work. So excited for this!
Bigboss
12/21/2019
Reply
I just released a new pack with the new Digital Human Base. I should be able to provide updates to the existing packs.
Cheers.
Bigboss
12/20/2019
Reply
Actually, I need to do some testing to see if I can get it to work.
Bigboss
12/20/2019
Reply
Thanks. For now, the PBR skin is the one that works. RL does not apply the Realistic skin to other layers than the body layer. Cheers.
Cheers.
gunnaphergando
12/20/2019
Reply
Just wanted to let you know. Still here waiting.
gunnaphergando
12/20/2019
Reply
Been waiting on your reply for weeks, but nothing. Still waiting for the jiggle buttocks and thighs.
stephanlburton
12/3/2019
Reply
Hi - I really need your CC3 Anatomically Accurate Male Base, but can't buy it through the marketplace. Please help!
jzhou1012
11/27/2019
Reply
Can we try BB CC3 Cloth Stylish Beards before purchase?
Bigboss
11/28/2019
Reply
Good evening, I enabled try on the mutton chop beard. You should be able to try it.
akuei2
11/21/2019
Reply
Hi, BB. your BB CC3 Cloth Anatomically Accurate Female Base not available in marketplace( policy issue ). Can you sold me underground than I send you DA point directyly?
bentzi
11/10/2019
Reply
Hi, we are interested in branding the "Toon Scientist" character. for example: changing the clothes color and ptinting our logo on his cloths etc. Is it possible and hwo to we communicate in order to produce such a character? thanks, Ben
gunnaphergando
8/20/2019
Reply
Yo, I bought content, the anatomically correct female for iclone. But I need the male and female dark skin anatonmically correct. All of them are unavailable. Dissapointed. Is there a way they can still be purchased and installed into my iclone and character creator. Any information and downloads will help a bunch thank you. I use the anatomically correct female with genitals in all my works.
gunnaphergando
12/20/2019
Reply
Yo, all our conversations been deleted from the message center. And I haven't heard from you. What's happenin'?
kamisfx
7/10/2019
Reply
will the anatomically correct/ nude models be available again soon? i'm working on a game and not sure where else to get these kinds
msvconsulting
6/15/2019
Reply
I am interested if you have any software I can use for health education animations for the different body systems.
nflthetim
4/26/2019
Reply
Why do I not have access to all the sliders on the "BB CC3 Cloth Anatomically Accurate Nude Male With Genitals Style_30"?
Bigboss
4/27/2019
Reply
Good morning nfittherim, do not worry. In the case of the Male Character, the Penis is a Prop accessory and consequently, you need to acces the morph sliders inside iClone by 1) selected the BB Penis Accessory, 2) going to the iClone Animation panel, 3) scrolling down and clicking on the Morph Animator Button. You can also right click on the BB Penis Accessoru and activate a Penis Erect Performance but make sure to disable the spring effect to get best results. Cheers.
OldAssMan
3/23/2019
Reply
Is it possible for you to fix the bad penis erect morph in the BB CC3 Male? It curls up horribly towards the tip, or explain to me how to correct it?
th3j1m@gmail.com if you need an example.
Thank you
OldAssMan
3/27/2019
Reply
It was the spring, I had found an old comment after I asked, sorry and thank you.
Bigboss
3/24/2019
Reply
Good morning, do not worry, tis is a simple fix. There are 2 reasons why you can see those deformations: 1) You may have a residual animation in the BB Male Penis prop. To fix it , Select the BB Male Penis prop from the scene manager menu (you need to select the penis prop, not the character). once selected, rightclick and select `Remove All Object Animation' from the pulldown menu. The second reason why you may see deformation is because you did not disable the Spring effect on the male penis.
matenn30
3/7/2019
Reply
すいませんbigbossさん。すでにコンテンツストアーの会員にえらばれていました。それとシティーのことありがとうございます。
I'm sorry, bigboss. It was already selected as a member of the content store. Thank you for that and City.
cynsegura
2/26/2019
Reply
Hi there I bought this pack because I need to smaller tongue of characters that I converted from daz. It says that it is for character creator but when I go to download it says that I need I clone 7. To be honest. I am upset. Because I bought it for character creator 3 to smaller tongues of daz characters that they are quite big for my toon character collection. https://marketplace.reallusion.com/cc-cloth-tongue-morphs-for-cc-characters Wishing you will be able to resolve my problem soon!
Bigboss
2/28/2019
Reply
OK. I need to regenerate them. I will do this this evening.
It is a bit of work as the pipeline I used to generate the original pack was not through the sliders. I need to export one iavatar per morph to generate the sliders and there are a few of them 😊…
I should be done this evening…
I am still not sure how this will help you but I will do it for you.
Cheers.
cynsegura
2/28/2019
Reply
If you have the sliders and you send to me at least. I will be able to use it. I unstalled iclone because I don't have lot of memory in my computer. And with the system you have it is only for iclone. And I bought because it says character creator..
Bigboss
2/28/2019
Reply
Good evening, unfortunately, even if I provide you with the morph sliders, these will only work for characters you create using CC and not for characters you convert from DAZ because these characters have a different mesh topology. Cheers.
Bigboss
2/27/2019
Reply
Ok. I think I finally understand the issue you are having. YOu can actually generate the morphs you need from the pack by creating morph sliders using the characters provided but to make things easy, I will add the sliders to the pack this evening. I will let you know when ready. Cheers.
cynsegura
2/27/2019
Reply
I need this in character creator. I don't have any other how to do other way. I am short on time to do that.I need them in character creator. I understood I was buying character creator. That it is what was saying the picture which is wrong. Because I cannot use in character creator. I paid the most expensive pack thinking it was the best. And now. It is not.
Bigboss
2/26/2019
Reply
The Pack you bought contains morphs for CC Base characters, meaning the mesh provided by Reallusion for Human characters. However, I did package the tongue as a separate Prop with embedded morphs in this next pack. You should be able to access the morphs if you export FBX which I assume you need to do if you do not use iClone... https://marketplace.reallusion.com/bb-tongue-prop-with-morphs_190087 let me know if a Prop works for you and I will send you as a gift. Cheers.
Romin
1/17/2019
Reply
Hi,
Can I purchase the Stuntcar with the Steering wheel in the right side?
JoeMcPeek
1/10/2019
Reply
Hi Big Boss, This is Joe McPeek, from Truebones. Please contact me at your earliest convenience. I can be reached at truebones@gmail.com Thanks
kvasir30
1/4/2019
Reply
Hello Bigboss, thanks for the Answer. I think, the Problem is, that i have only 4 Morph Sliders in "MeshLowerGenitals". In "BB Base Males Penis" are none Morph Sliders ! Greetings K.
Bigboss
1/4/2019
Reply
This is normal. CC only shows character morphs and not the morphs for the Penis Prop (RL Limitation). Export the character to iClone and in iClone, when invoking the Morph Animator, you will see the Penis Morphs as well. Hope this helps . :)
kvasir30
1/4/2019
Reply
Hello BigBoss, yesturday i bought "BB CC3 Cloth Anatomically Accurate Nude Male With Genitals Style_30". But there are only 4 Morph Sliders and no Erectile Motions. Can you help me ?
Greetings K.
Bigboss
1/4/2019
Reply
Good morning K. The Erectile motions are embedded motions in the Penis Prop. To invoke them, 1) select the avatar, 2) right click 3) and invoke the Penis Erect Performance. NOTE: Remember to disable the Penis Spring to get full erection. to do that, 1) select the BB Penis Prop from the scene management panel 2) scroll down the modify panel to the bottom 3) deactivate spring in spring section. Thanks for buying my product.
Eddy's
9/26/2018
Reply
Hello,
I bought a new computer and installed iClone and CC.
I want to re-download and install your beautiful content (
cc Cloth Anatomically Accurate Female Base With Genitals Style_10) and some other stuff but the downloadmanager states that it cannot find the program to install the content on????
Greetings Eddy Loonstijn
Bigboss
9/26/2018
Reply
Good evening Eddy. I assume you have this issue with other content as well. It sounds like the download manager is confused with registry entries. Try to consult your inventory from inside iClone and re-install the packs from inside iClone. I think you can do this from the Pack icon on the toolbar.
Ultraman1
6/26/2018
Reply
hello Sir, I need a favor I purchases the Middle Est City EZ Worldbuilder Kit. I want to export it out but it does not have a export license , can I purchase the license from you directly , I will pay extra for the license, it will fit well into my project. Thank you Tony.
franksil03
5/18/2018
Reply
Hi Bigboss
I Have EZ Worldbuilder Medieval Modular Kit, I'm a bet confused on how to put a build the buildings. Do you have an step by step guide or something on how to put them together ? Thank You
Frank
Bigboss
5/18/2018
Reply
Good morning frank. I do not really have a step by step guide. The trick to make it easy to build the buildings is to 1) apply a structural part to the scene (e.g. a wall unit),2) Adjust the grid size in iClone preference panel to match the width of the structural part, 3) Make sure "Snap to Grid" is activated in the iclone preference panel. 4) Select the structural part, hold the CTRL key and use the transform gizmo to move the part creating a duplicate snapped to the grid. Repeat the process.
yoshicarvajal
3/29/2018
Reply
Hi, I purchased your Cloth Anatomically Accurate Female Base With Genitals Style_10. I am unable to edit what I purchased inside of cc. Do I need additional content packages for this to work? (I'm new to iClone. I have iClone 7 and 3DXchange pro) Thanks!
Bigboss
3/29/2018
Reply
Good morning yoshi... Do not worry, the morph sliders are accessible from a panel directly in iClone. 1) Select Character, in Modify window, 2) Select the Animation TAB on the top of the window (second tab) 3) Scroll down to the bottom and clikc on the Morph Animator button. you will see the sliders. Mkae the adjustmants and save your character. Thanks for buying my product.
dehlbart
2/15/2018
Reply
hello, i purchased the following: G5 Female Nude Model Style_2
it stated that it was compatible with all "Bigboss" clone cloth. no matter what Bigboss outfit or cloth i put on (from G5 Cloth Gwynn Complete Wardrobe by Bigboss) the front of both hips protrude through the cloth. Please help me with this.
thanks,
D
Bigboss
2/15/2018
Reply
If you dress up naked characters, you can easily hide the innerskin tat pierces out by applying an opacity to the RL_Lower skin. If you send me an e-mail to bigboss40@videotron.ca, I can send you the opacity for the skin layer which will fix the problem. Cheers.
iamcode23
2/7/2018
Reply
So I bought your cc Cloth Beard Morphs Pack with PBR Face Textures. I have iClone 7.2 and when I download it and run the installer I only have the option for iClone 7.01 and if I try that it fails to get the serial number and I cant download it. Please help. Contact me at iamcode23@gmail.com
Bigboss
2/8/2018
Reply
Good afternoon code23, all I can assume is thatz you may need to install some latest reallusion patch that impacts the download. Run icole 7.2, press the check for update button. Once you are sure you have the latest sw, go to inventory and download again?
diomkal
1/21/2018
Reply
Yes it works for me and thank you very much. I just by G5 Small Crowds Sitting Audience in Reallusion city and G5 Small Crowds Concert Audience in Reallusion city. Then I wait for the 2 others: Small Crowds Traffic Vol.1 Consumer Vehicles and Small Crowds Medieval Idle. 636521642442840656. Thanks again.
Bigboss
1/21/2018
Reply
You should find the extra packs in your inventory. Cheers !
diomkal
1/21/2018
Reply
Hallo BigBOSS,
i had already bought things from you.
G5 Small Crowds Sitting Audience in Reallusion city
I would like an offer(reduction) from you, because I need a few things from you.
Here follow what I needed:
1-Small Crowds Traffic Vol.1 Consumer Vehicles
2- Small Crowds Medieval Idle
3- G5 Small Crowds Sitting Audience in Reallusion city
4- G5 Small Crowds Concert Audience in Reallusion city
It would be nice if you accept it.
thanks in advance
K. Diomande
Bigboss
1/21/2018
Reply
Good morning, I had already sent you a message one week ago. Here is what I propose. Buy any 2 packs from the above, send me a message when done, I will send you the other two as a gift :) Let me know if this is to your satisfaction. Cheers.
RKay
1/12/2018
Reply
Hi. I just purchased the Smiths RL Head collection. I get "cannot load invalid data" error message when I try to apply them in iClone7. Is there a solution?
Bigboss
1/12/2018
Reply
Good morning, do not worry, this should work. The Smiths are G3 Heads which means you need to apply them to G3 or G5 Characters. They will not work on CC Characters. For example, Load Chuck Character into your scene and apply the head on Chuck Character. Let me know if you still have issues. Thanks.
oatt
11/17/2017
Reply
Big Boss, my apologies for my own ignorance. Your info worked out great! Thank You.
oatt
11/15/2017
Reply
I'll seek a refund.
oatt
11/14/2017
Reply
Hi. I am respectfully asking for help. Thank you.
oatt
11/12/2017
Reply
Ibought these assets assuming that I could place the clothing on characters of my own...is that incorrect?
oatt
11/12/2017
Reply
Thanks, but how do I get Your clothes assets onto my characters?
oatt
11/11/2017
Reply
Can you point me to tutorial resources that would help me implement your clothing assets that I've purchased? I'm a newbie. Thanks.
fxswan
11/4/2017
Reply
Do you have a Jewish High Priest Robe with the 12 stones? I saw it somewhere just can't find it now....
fxswan
11/1/2017
Reply
In your Olympus Gods you show angels with wings. Are the wings rigged for animation? TY
fxswan
11/2/2017
Reply
ty
Bigboss
11/2/2017
Reply
Yes the wings have 2 embedded animations for Fly forward and Fly backwards.
Cheers.
Ultraman1
9/6/2017
Reply
Its called the biblical females and males that the name of Characters
Ultraman1
9/6/2017
Reply
Hello, Bigboss I need a favor. I purchased some characters from you that I need to used in one of my project and I need to export into Maya FBX from i clone but it stated that I need a export license how can I get royalty free and a export license for your models Thank you
Bigboss
9/6/2017
Reply
When you try to export using 3dxchange, and you get this error, you should have an option and a link to buy the export license. If this does not work, you can go to the product page where you purchased the product, proceed to buy the product until you reach the checkout page. In the checkout page, it should already know you purchased the base license and let you add the export license. Hope this helps. In both cases, you should be charged with the difference since you already have a license.
Armstrong
9/1/2017
Reply
Hi BB, that's cool. Ill mail you today. Thanks for that. She's to get used as an Anti-Bullying character in a local school here.
In fact, if the developer creates a male version and some sci-fi suits I'm a customer for those too. :)
Armstrong
8/31/2017
Reply
Hi BB,I just purchased the SKYE Danger suit that comes with the character but the download has given me a different SKYE character with different hair!
I understand that the hair advertised on the graphic is in fact in another pack doubling the price.This IS none the less an irritance.
The hair is missing?
Are the hairstyles individually available because I have to say, this has upset a couple of people here.
Many thanks....
Armstrong.
Bigboss
8/31/2017
Reply
Don't worry about it. Send me an e-mail and I will send you the hair style accessory. bigboss40@videotron.ca
Cheers.
Oremor
8/26/2017
Reply
I tested a project file that was saved with IC 6.5.
With this file the nipple mesh Does conform to breast morph changes in CC2.1
Also: The (IC6.5 project) Mesh_UpperNipples is visible
in the Cloth Layer settings.
However the MeshLowerPubicHair is Not visible.
With a new project the Mesh_UpperNipples is Not visible
in the Cloth Layer settings,
and does Not conform to breast morph.
However the MeshLowerPubicHair Is visible.
It works as expected in IC 6.5 CC1.5
but not in IC 7 CC2.1.
Oremor
8/25/2017
Reply
Ref:Female Base Style_6
I tested today.
Notes:
*Must open in IC first not CC.*
When opened in Iclone first Xforms do work.
When exported From IC to CC Xforms do work.
*Also noticed Genitals display is Better
when opened in Iclone first and then exported to CC.
However When in CC (Exported from IC)
if breast size is changed
Nipples do not conform.(?)
I can send a PM with Camtasia video for reference
if it would help.
Thanks for reponse!
Iclone 7.01.0714.1
CC2.11.1918.1
Bigboss
8/25/2017
Reply
I think I understand your scenario. What you are experiencing is probably expected. I think that what is happening is that changing breast size is a Morph of the Base mesh without scaling the breast bone. In this case, the nipple mesh will not follow. However, if you apply a character shape like the fat women to the CC character, then the Breast will follow because the new shape is issues from resizing bones which means the nipples will inherit the same effect as the breast due to the skinning
Oremor
8/24/2017
Reply
Accurate Female Base With Genitals Style_6
Does not work with Iclone 7.
I purchased export version.
The nipples do not conform when breasts are re-sized.
The Xform handles do not work.
Have to use 'mesh edit' to modify size,rotate,move.
This pack did work with Iclone 6.5
Bigboss
8/25/2017
Reply
Good morning Oremor. I just tested in iClone 7 and everything seems to work ok. Are yous sure you are selecting the XFORMs ? I tried to apply a different Morphology to the character in CC 2 and also scaling XFORM in iC7 and they all work? Are you sure you have the latest patch installed? Thanks.
Bigboss
8/25/2017
Reply
Thanks for the information, I was not aware of this. I will look into this this weekend to see if there is a solution. Bare in mind that this could also be a Bug in iClone 7 which might get fixed along the way but I will investigate the issue. Thanks.
unitynovice
8/15/2017
Reply
Please Help! My wang keeps falling off...I bought Product Name: G6 Natural Humans Mason & Heidi NUDE Base Characters with Genitals, and when I use the parts on characters in iClone, they fall off due to gravity as soon as the animation starts. Pardon the graphic language, but we are trying to get the property to interact and bounce off of the legs. Sorry. And thank you.
And whatever you're doing, keep it up.
Bigboss
8/15/2017
Reply
Good evening unity novice. The penis is designed to work with spring loaded bones to which I have skinned the mesh. In order to use physics kinematics to achieve what you are trying to do, you need to attach invisible capsules to each bone of the penis chain and apply rigid properties to each capsule so they can be used as colliders with the leg bones. But I have not tried this and I fear that iClone will not accept to have both springs and physics properties in the chain at the same time.
grierson
6/29/2017
Reply
I have your Mage character and no matter where I place the animations the perform function tells me it cant find the animations. Some of the suggested places don't make any sense but I tried them anyway and nothing works. The perform function NEVER finds them. Help How do I fix this?? grierson@lek.net
Gazzzzzzzz
6/26/2017
Reply
Hi Big Boss, I purchased EZ Motions pack for male and female (both walk and run cycles - I'd like to download it again to use with IC7 - can you offer some guidance to go about that? cheers Gazzzzzzzz
Bigboss
6/26/2017
Reply
Good morning Gazzzzzzz. I am not absolutely sur ebut I think al you need to do is make sure you only have iC7 running and then go to you inventory and download again. It should install in the iC7 Folders. Alternatively, all you need to do is copy the motion folder that was installed previously in the corresponding folder of iC7. When you have iClone 7 running, there is a button onthe toolbar for Packs. If you ckicl on it, it will show all the packs you purchased and you can install from there.
Jman64
6/15/2017
Reply
Hello,
I'm interested in the anatomically correct CC characters, however I'm unclear about what the different styles are. Is there more information on the differences in styles or images available else where? Thanks.
Bigboss
6/15/2017
Reply
Generally speaking, the higher the style, the better the character is so your best purchase would be Style_5 Male (circumsized), Style_6 female and my first cc Male (non-circumsized). Hope this helps.
Geoffrey James
6/12/2017
Reply
I am working on a project that takes place in 1900s but which requires some nudity. Shaved or trimmed pubic hair will look anachronistic. Can you help me or point me in the right direction? By the way, I credited you in The Blood Pope, which is 4 for 4 in the film festivals in which I've entered it.
hackersz
3/23/2017
Reply
can you give some guardlines on how i will also create or build my own characters and props , buh pls is it done 3dxchange ,am not sur e that is the real app i have tried building some but it is not working so can you help me with this hope u will reply me soon
hackersz
3/23/2017
Reply
hello please how do i also create characters for iclone and some other awesome props
GSSEV3D
2/4/2017
Reply
Hi, I have the small crowds roman soldier and when I exported for unity the model has no UV set. I tried some other exports from 3dxchange 6.51 and they were fine. I inspected the soldier in carrara and it shows no UV.
Is it he model or is it o do with 3dxchsnge. I just upgraded the licence to export.
Bigboss
2/4/2017
Reply
Good morning Gssev3d. You can see the UV in iClone by pressing a small grid button in the Modify Material Menu beside the edit Material button. The character definitely has UVs. If you send me an e-mail at Bigboss40@videotron.ca, I can send the FBX version. Also, you can try different export options in 3DXchange. Hope this helps. Cheers.
alandau613
12/19/2016
Reply
Hi. I was wondering whether the chubby and stretchy toonmaker bases that you offer also conform to the g5 clothing or is it only stuff from Bigboss. Either way I would like to find out before I purchase.
Many thanks
Bigboss
12/19/2016
Reply
They will conform to the g5 clothing no problem. They are made using the G5 Base. Cheers.
jack_20110504232806842
12/6/2016
Reply
I purchased Holy Night Animals a couple of years back. I recently purchased a new computer and now have no way of reinstalling it. If you have a record of that purchase are you able to resend the link? If not, oh well. Thanks
Bigboss
12/7/2016
Reply
Good morning, I sent you a link to a Gift for the Pack. Cheers.
dvande
12/3/2016
Reply
The Animal Kingdom Tiger comes with 2 walk motions. Tiger_Limp, and Tiger_Walk. However, both of these motions are identical and are indeed the Limp motion. No normal walk motions comes in the package as advertised. The walk motion has a bad limp, so can't be used as a walk. Similar is true with the Animal Kingdom Leopard (I purchased through the Marketplace). Though it does not supply a Leopard_Limp motion, the Leopard_Walk motion has a bad limp, so can't be used as a walk.
Bigboss
12/11/2016
Reply
I did check, and unfortunately, they are not packaged wrong. The Walk motions appear to limp in latest iClone and I am not sure how they were originally but I see that I use the same motions for all cats and since the proportion of the leg bones is different from one Cat to the other, some look better than others. I would have to redo all the motions to remove the limping and these are very old files. I will put them in my to-do but I have many immediate commitments to complete first. :(
dvande
12/11/2016
Reply
Bigboss: I would prefer to just have the right motions for them. I assume they were just packaged wrong. Can you check and see Please?
dvande
12/5/2016
Reply
I would prefer to just have the right motions for them. I assume they were just packaged wrong. Is that possible?
Bigboss
12/4/2016
Reply
Good morning dvante. These are very old animals, in the first ones I made. If you like, I can give you another bigboss pack no problem, just let me know which one you like. Cheers.
Geoffrey James
12/1/2016
Reply
I am having trouble finding the "dining room" in the ornate castle set. (Not the furniture...the room). Also, is it possible to get a pre-built castle for a simple exterior shot?
Bigboss
12/1/2016
Reply
Good afternoon, the dining room is inside the kings hall prop. Unfortunately, I do not have a pre-build castle for this pack. Cheers.
dvande
11/17/2016
Reply
The Animal Kingdom Tiger comes with 2 walk motions. Tiger_Limp, and Tiger_Walk.
However, both of these motions are identical and are indeed the Limp motion. No normal walk motions comes in the package as advertised. The walk motion has a bad limp, so can't be used as a walk.
Similar is true with the Animal Kingdom Leopard (I purchased through the Marketplace). Though it does not supply a Leopard_Limp motion, the Leopard_Walk motion has a bad limp, so can't be used as a walk.
pedrosura
11/17/2016
Reply
Thank you Bigboss!
pedrosura
11/14/2016
Reply
Cool no problem. I had a small request which is to create CC Cloth that matches the Strike Troops and Assault Troops (props) so that we can create characters for dialogue. So far there is no Scifi cc cloth. Or to create a character that matches these props. I have tried to convert the props to iavatars but have not succeeded. I think it would be a good addon.
eternityblue
11/3/2016
Reply
Loving the cloth I bought recently, if I could request some sort of cloth armor system for CC, that would be nice. Thanks!
hufos
10/17/2016
Reply
Hi,
I just purchased your male and female small crowds packs, and I was wondering how I can change the diffuse maps of the shirts and dresses, etc of the characters.
When I click on the diffuse map in iClone, it sends me to a folder that has nothing to do with the zombie paks.
A search similarly reveals no textures anywhere for the little guys.
So how can I do this?
Thanx in advance,
hufos@hotmail.com
hufos
10/21/2016
Reply
Thanx ever so much. That did the trick. I didnt have PS set in the preferences. It still points me to that unrelated folder but I can edit the maps now. Thanx again for your help.
Bigboss
10/20/2016
Reply
The textures are embedded inside the Character. You see a thumbnail of them in the modify material panel. You can select and save them on your hard drive for edit by pressing the button that looks like a diskette symbol. If you press the other button that is supposed to invoke you texture editor and it does not work, it may be that you have not configured photoshop or another editor in the iClone preference menu.
hufos
10/20/2016
Reply
Hi. Thanx for your response. It doesnt work when I do that. What happens is that it takes me to a folder in my downloads section for iclone stuff and brings up a file named Tex in an Iron Armor file that I downloaded with an OBJ for import into 3dXchange. That file folder does not contain any of the textures shown for the zombie characters in the rightside pulldown. Where does the autoinstall put the texture files? I cant find it with Cortana.
Bigboss
10/18/2016
Reply
Good evening hufos. You need to select the character by clicking on it and then you will see the diffuse maps inside the pulldown of the right handside Materials Panel in the Modify Menu.
pedrosura
10/17/2016
Reply
I have your Assault Troops and Strike Troops, they are great. But these are props. I would love to see their outfits as CC Cloth or characters that can be purshased for dialogue animation
cina
9/13/2016
Reply
Hi Bigboss. I am a fan of all of your work. But I also wanted to ask you if you don't mind. Do you know if I can sell sketchup models on iclone? The World builder packs. Can I recreate from them and market them? Or what is it that people are using to create props to sell on Reallusion. Such as cafes and stuff. Please give a stranger some help. Thankyou
Bigboss
9/14/2016
Reply
You can easily create worldbuilder packs with Sketchup and sell them in iClone. You need a 3dXchange License to import and convert your sketchup models to iClone Props but it is fairly easy to do as long as the models are well structured. Cheers.
GroopFace
8/29/2016
Reply
hello, I need help with getting started with Mason and Body Suit. Can you provide some instructions for this one?
evidanse
8/26/2016
Reply
Hello, I need your help.
I want to create a long dress for iclone character creator but but the result is ugly and not natural (the dress is stretched between the legs).
No one can help me.
How did you manage to create your roman dress ?
Thank you very much.
Michel
Bigboss
8/29/2016
Reply
cc will only import characters which respect perfectly the rules defined in the documentation for the cc Templates. Assuming you use the latest cc Character Templates provided by Reallusion, you need to also put the .fbxkey file in the same folder as your exported fbx and also name it the same root filename as the name of your exported fbx file. e.g. rename male.fbxkey to mycharacter.fbxkey to match mycharacter.fbx. The fbxkey file contains the facial morphs for the character and is mandatory.
evidanse
8/29/2016
Reply
Hello again...Thez problem is when i create the dress in marvelous designer, and skin it to my character, the mesh is stretched...I tried to paint weight in maya, but cc shuts down when I want to import my fbx file... Maybe I forgot something ...Can you help me ?
Bigboss
8/27/2016
Reply
Good afternoon Michel. I applied softcloth physics in iClone with a gradient weightmap on the skirt part of the Mesh.
Cheers.
kevroneem31
7/29/2016
Reply
PEACE AND BLESSINGS ARE YOU ABLE TO UPGRADE LIONS(ACTOR) IF SO I NEED A REALLY GOOD LOOKING LION WITH MULTIPLE MOTIONS FOR A SCENE IM DOING...... THANKS A MILLION
lpatter
7/22/2016
Reply
Is there a problem with iclone 6 that keeps me for lengthening iclone 5 Olga's dress
Bigboss
7/22/2016
Reply
I am not sure how to lengthen Olga's dress but no, there is nothing in iClone 6 that would prevent you to change the geometry of the mesh of a G5 Character.
rocketrod
5/23/2016
Reply
Greetings:
Love the V1 and V2 walk motions! I notice that when I use them on the Chuck, the G5 character they work without resetting the actor pivot point (both the "Align actor motion" and "Reset Motion Root" functions checked). However, when I use the walk motions on the Toonmaker 2 character "Stretchy," the actor's pivot always resets every time I add a new walk motion. How can I keep the character aligned with each added motion? Couldn't find "cycling motion function" on timeL.
Thanks!!
Rod
rocketrod
5/24/2016
Reply
Finally figured it out. The graphic symbology used to label the motions is the key to keeping the actor oriented (facing) to the previous applied motion. I didn't catch this. Thank you. Once again, great products and I'm sure to purchase more of them. Keep them coming, please!!!
Best,
Rod
Bigboss
5/24/2016
Reply
When you use cycling, iClone does not reset the motion root between cycles so for sure, the character will return to the origin.
rocketrod
5/23/2016
Reply
Here's what I tried. I used G% Chuck this time and applied two "Walk Turn R90_2" motions one after the other to Chuck. He began facing the Y-axis, walked then turned right 90 degrees. Just as the second R90 motion began Chuck snapped 90 degrees to the left facing the Y-axis, walked and turned right 90 degrees. In other words he should have ended up doing a total of 180 degrees of turn (i.e., two 90s in same direction) but ended up pointing in the same direction he started. Any ideas? Thanks.
rocketrod
5/23/2016
Reply
Greetings:
Thank you for your time. Love your products!! I have the latest version (6.42.2728). I did test Chuck and Stretchy on the same version. Very strange.You say not to use the "cycling function" from the timeline. May I ask what that is? Perhaps it's the answer.
Thank you,
Rod
Bigboss
5/23/2016
Reply
I tried on stretchy here and it work fine. I know that on iClone 6, there is a bug and you need to be at 6.4 latest patch for this to work. Otherwise, it should all work fine? Did you test Chuck on the same version of iClone than Stretchy?
scrappyontheroad
5/18/2016
Reply
I need a special character or two like a fox I have a pic of this character and need to know if you can do it. I sent you a private message with more details.
alandau613
4/4/2016
Reply
Is the g5 cloth bases for toonmaker only with bigboss cloths or any g5 cloth. Also can you use g4 cloths as well or is the set default g5 only. Many thanks
Ashley
Bigboss
4/4/2016
Reply
Good evening Ashley. My G5 Toonmaker Cloth Base is not only for Bigboss Cloth, it is G5 compatible and will work with any Reallusion Cloth that work on Chuck and Gwynn. Cheers.
Süsse 2901
3/14/2016
Reply
Hallo
Ich habe das Projektions Screens gekauft.Bei mir funktioniert das Kussmund Video nicht
Bitte überprüfen Sie das einmal
Lg. Jutta
Süsse 2901
3/14/2016
Reply
Sorry hat sich schon erledigt war mein Fehler
Mikesmith
2/24/2016
Reply
Hi BigBoss. I am interested in the animals that are available for a school project that I am putting together. are they available with a in low count.
Mike
Bigboss
2/24/2016
Reply
All my Animals are low poly count if that is what you are asking. They should be fine for a school project. Cheers!
tonyguy001
2/3/2016
Reply
I could REALLY USE some business G6 Business suits and shirts with ties for my male news anchor characters and maybe some fashionable dresses for my G6 female reporters.
TheOldBuffer
1/11/2016
Reply
hello Bigboss.
I am having problems with several of the 3duniverse characters, Skye Gramps and the einstein lookilikee. When rendering in Indigo the eyes render out totally black. I have traced the problem to the3 eue surface material. Manually displacing the material in Indigo solves the problem but this workaround is impossible to do in an animation sequence. I have contacted 3dUniverse and they pointed me in your direction. Thanks in advance.
J Clark
Bigboss
1/11/2016
Reply
Good Morning OldBuffer,.. I loaded the Toon Scentist into iClone 6.3 and in the Plugin Tab, activated the indigo render scene and I cannot reproduce this problem? Is there s specific setup I need? Can you send me a project at bibgoss40@videotron.ca? One thing you can try is make the eyes material double-sided in iClone to see if the problem goes away? This looks like a bug in the renderer but I cannot reproduce here? If you send pa project, I could investigate further. Cheers.
Humbleworks
12/25/2015
Reply
Merry Christmas and Happy New Year. I seek a ready made animated female with tambourine and tambourine playing action.
Or a tambourine with playing action I can attach to a female G4/G5. Give Heather my love...long time no speakee.
vritelis
11/9/2015
Reply
I am looking for characters applauding a performance. So far haven't found any.
Also how to make small crowds with, say, Toone characters
kevroneem31
10/2/2015
Reply
PEACE AND BLESSINGS!!! CAN YOU MAKE ROMAN AND BIBLICAL CHARACTERS IN CHARACTER CREATOR IF SO WILL BUY THANKS FOR YOUR TIME HAVE BLESSED DAY PEACE!!!!
Bigboss
10/2/2015
Reply
I will do them for sure but I need to wait for the next version of 3DXchange by reallusion so I can make my own iCloths for cc.. Sometimes in December... :)
Tarampa Studios
6/8/2015
Reply
Hi Bigboss, I love your EZ Tree Pack! Can you please also consider a pack for Australia? EG: Ghost Gums/River Red Gums/Swamp Gums/Spotted Gums/Stringy Barks, Moreton Bay Figs or beauties like these: https://c4.staticflickr.com/8/7294/8744558305_95b994fd26_b.jpg Unlike most large trees, many Eucalypts can survive in snow-beach-desert AND rainforest due to alcohol in their leaves - which also explains why many koalas behave like grumpy little drunks when they're on the ground... haha
Gianni De Matteo
5/29/2015
Reply
Look forward to seeing what you can do!
--Guido
Gianni De Matteo
5/27/2015
Reply
Question 2: How much would it cost to make a MIDI controlled grand piano? Over at Content Paradise, there's a MIDI controlled upright, but I'm in the market for a full sized grand, like the Steinway Model D. If it's reasonable, I'll commission Cricky Or whoever has the skills to make one.
Bigboss
5/28/2015
Reply
Thanks for the various links Guido. The difficulty is in finding a way to transpose Midi events into something that triggers animations or motions that iClone can recognize. Just for simplicity, I can be reached at Bigboss40@videotron.ca but I will investigate further on this. Cheers.
Gianni De Matteo
5/27/2015
Reply
At any rate, if you can create such a product for the iClone community, it would be the only commercially available product of its kind at present, and I'd be one happy camper!
Gianni De Matteo
5/27/2015
Reply
Hi! It might be easier if I just sent you a private message. In addition to the work already done by MCasual and Lockdown42 that I described in my posts on your site, the Blender community has produced another free script that gets the job done (http://blenderartists.org/forum/showthread.php?195434-MIDI-Driver-music-driven-animation-creator). Meanwhile, Daniel Wilde produced a MIDI animated avatar playing a grand (http://roboticensemble.com/), but his product is now discontinued...
Gianni De Matteo
5/27/2015
Reply
Lockdown42 made a fully-rigged grand piano for his Master's project, and made the code available under a Creative Commons license. However, I have no computer programming skills whatsoever, and wouldn't know what to do with this code. http://sourceforge.net/projects/pianissimo/
Gianni De Matteo
5/27/2015
Reply
Awesome! Here's some inspiration. MCasual has free a script that turns MIDI into animation on the DAZ platform, only there's no full-sized, accurately modeled concert grand (Steinway Model D style) available for DAZ Studio to my knowledge. He uses his script with a synth. Nice, but not what I need. https://www.youtube.com/watch?v=KpZe6WmncHs
Bigboss
5/27/2015
Reply
Oh! I was looking at ideas for a new project and this sounds really interesting. Give me a few days to think about the feasibility of this and I will get back to you. Note that I am a musician and use Midi all the time... Cheers.
Gianni De Matteo
5/27/2015
Reply
Hello! In the picture of Cricky's grand piano, it appears to have a sound board and strings inside under the open cover. However, in the animation, it appears empty inside. Could you tell me if it comes with a "soundboard" and stings or if it's empty inside? Thanks! August
Bigboss
5/27/2015
Reply
The Piano is a separate multi-part Prop with Sound Board, Strings, chassis etc.
The Piano Keys are Avatars linked to the Prop. In other words, you can modify strings and the general looks of the piano if you want... Hope this helps.
Cheers.
dhendr
5/11/2015
Reply
Can you please make a Great Pyrenees with the black gray mask face And do trick like sit lay beg run thanks Be looking for it on your store They are great dogs Once again Thanks Danny
Waaaaaazup
5/4/2015
Reply
Dude! You made a moving tire and for FREE! Right on, thanks man!
Waaaaaazup
2/24/2015
Reply
Hi Big Boss! Great products! I bought your Small Crowds for the school bus vehicle, it's great, just wondering if there is any way to get the door open? I don't need it to open, just to not be there so my characters can get on. I tried to load into 3dx but it won't load bc it's associated with Iclone6. Thanks!
Bigboss
3/3/2015
Reply
Goods evening Waaaazup. I have just updated the Schoolbus. You should be able to go back to your inventory and download the Pack again which will provide you with a School bus with hinged door and stop sign you can manually animate.
Let me know if all is Ok.
Cheers!
Bigboss
3/3/2015
Reply
Don't worry about it. I will work out the chassis so you can open the doors and send you an update by tomorrow evening. Cheers.
Waaaaaazup
3/3/2015
Reply
Hi! I was able to load it back into 5 like you said and then import into 3dxchange... to open that door I'd need to take it into 3dsmax, but I do not have the pipeline version! I'll keep trying in 3dx to remove that door, but I think it is part of the frame.
Bigboss
2/24/2015
Reply
Good evening Waaaaaaazup!
Currently, There is no way to get the doors to open but it would be editable easily in 3dXchange or other 3D applications. The Products are Native iClone5 and thus you should be able to edit them into 3dXchange. I assume the reason you cannot edit them is because you saved them in iC6. Simply download them again using iC5 and you should be set. Hope this helps. Thanks for buying my Products :)
patrickdengler_20100612163812926
1/18/2015
Reply
Can you tell me the bone count in your low poly line crowd? I think I have to be under 78 for MonoGame/XNA.
Bigboss
1/19/2015
Reply
Oups, I misread your question. The Bone count is 139 because they carry a full facial skeleton.
Bigboss
1/18/2015
Reply
Small Crowds are about 15K - 20k polys.
Cheers.
lpatter
1/11/2015
Reply
Ha ha! Bigboss- you assume I have common sense. I just found weight maps now I will have to learn how to bake.
logangorilla
1/7/2015
Reply
Hi there - do you sell the motion files separately? I'm looking for some German WW2 motion files in bvh format to buy. Thanks
logangorilla
1/8/2015
Reply
Ok fair enough. Thanks for the response.
Bigboss
1/8/2015
Reply
If you mean selling the motions files in another format than iClone proprietary format. The answer is NO.
Cheers.
lpatter
1/3/2015
Reply
Thanks. I will check it out later when I learn how to use ic6. But it works with the bullet engine.
Bigboss
1/3/2015
Reply
More good news...Once you have set the project engine to Bullet, you can 'Bake the animation of your iSoft Props and then reset the project to PhysX to use with other types of Physics props... :)
lpatter
1/2/2015
Reply
For my newly purchased iSoft Physics this is the error in IC6.
It works with the Bullet engine but not the PHYSX is there anything to change that. I have not used them in IC5. This is the error message
"The physics engine in the object is different from the physics in the project". You need to reset the physics for the object or change the physics engine in the project settings.
I am using the IC6 default settings. PhysX Engine, Rigid Body ON soft Cloth ON.
Bigboss
1/3/2015
Reply
I did some tests and it is possible to use the PhysX engine with iSoft props but that means making a completely now product altogether. What you need to do is create a weightmap texture that mimics the 'Pinning' of each iSoft Softcloth (i.e. black dots for pins, white everywhere else), apply it to the prop and set the physX soft Cloth attributes to one of the provided presets (e.g. Denim, etc...) This is not trivial but is feasible.
Hope this helps.
Cheers!
Bigboss
1/2/2015
Reply
I will try and figure out the procedure for making them work in iC6. It should not take long... :)
Gazzzzzzzz
12/20/2014
Reply
HI BigBoss, how do I move your pack over to IC6?
Bigboss
12/20/2014
Reply
IC6 should be downwards compatible with all my packs. If there are issues with any of them , let me know and I will fix it. Cheers.
Tarampa Studios
11/4/2014
Reply
VICTORY!!!!!!!!!!!!!!!!
Thank you SOOO SOOO MUCH!!
It's fabulous!!!
Can't wait til I learn how to do amazing tricks like that myself! :)
PaulAlders
6/27/2014
Reply
Hey - I would love to have an doctor's lab coat for Mr. Pose (round). Do you think that this is possible?
Thx
PaulAlders
6/30/2014
Reply
Great, looking forward to this! Thanks
Bigboss
6/27/2014
Reply
Thanks for the request. It is possible but not within the next few weeks as I have several jobs to complete. I will put it in my to do's. Thanks.
lpatter
3/19/2014
Reply
I don't know how to send him a PM since he has no store or products directly linked to him. A search of his name pointed to you
Bigboss
3/25/2014
Reply
I have passed your message to Cricky as I do not have the ghostwriter in my store. sorry.
lpatter
3/17/2014
Reply
This is for Cricky. Do you have the ghostwriter iProp and what is the music you used in the video promo. Thanks. http://www.youtube.com/watch?v=gFDN3y7QLxY
Bigboss
3/18/2014
Reply
I passed on the message to Cricky. He does have the ghost writer. Perhaps you can send him a PM. Cheers.
johnwb2
10/26/2013
Reply
Hi
That would be nice if I hadn't already purchased the Product Name: G5 Gaming Zombies COMBO for Horror Movies Offered on the 30% off offer page foriContent: 2,516 3,595 | Export: 4,616 6,595 (?) before I knew the motions link did not work. So I'd have to purchase the charactor pack again to get the motions?
Thanks,
John
Bigboss
10/26/2013
Reply
John, I am not sure I understand what you mean by the motion link did not work??? Can you send me an e-mail at Bigboss40@videotron.ca and I am sure I can resolve this for you... :)
Thanks.
johnwb2
10/25/2013
Reply
Hi,
just curious if this is going to be offered for sale in the future. Thank you,
John
tG5 Gaming Zombie Motions for Horror Movies.
The content has been removed by the author and is no longer available
richinri
10/11/2013
Reply
I am looking at Stunt Car 1&2 and 2 says it compliments one but it looks to me 2 already has everything in 1 plus. Am I correct?
Bigboss
10/11/2013
Reply
You are likely to have all you need in 2 except the human motions which are different. My recommendation is to buy 2 and if you need anything from one, send me an e-mail at bigboss40@videotron.ca :) ... Cheers.
poeticwarfare
9/20/2013
Reply
i need a heaven and hell layout,angel and demon charaters [realistic]
Bigboss
9/30/2013
Reply
I will put that in my to do list...
Cheers.
animatom
3/19/2013
Reply
I just bought almost all Small Crowds packages and let me tell you, these are probably the most usefull stuff for my movies I ever bought. Great work.
jlbmi
11/13/2012
Reply
Boss love your horde / group content. Try one with fish great for water scene
Bigboss
1/4/2013
Reply
Hi Jim!
Thanks for the idea. Will eventually get to it :)
Cheers!
v.varriale21
11/9/2012
Reply
Hi, Bigboss,
thank you so much for your outstanding Roman historical cloths! I'm really satisfied
v.varriale21@libero.it
Bigboss
11/9/2012
Reply
Thanks for the positive feedback, it is extremely appreciated.
Larry Tate
11/2/2012
Reply
This is a private message
Larry Tate
11/2/2012
Reply
This is a private message
Gazzzzzzzz
9/14/2012
Reply
This is a private message
flamebox
9/12/2012
Reply
This is a private message
flamebox
9/12/2012
Reply
This is a private message
nostalgia
8/30/2012
Reply
This is a private message
nostalgia
8/30/2012
Reply
This is a private message
jbadr2001
8/25/2012
Reply
This is a private message
v.varriale21
8/21/2012
Reply
This is a private message
nostalgia
8/4/2012
Reply
This is a private message
jnenx
5/23/2011
Reply
This is a private message
ecosdelparaiso
5/16/2011
Reply
This is a private message
Bigboss
5/16/2011
Reply
Good evening, ...
I would need a little more information on the character. Can you send me a Pic at Bigboss40@videotron.ca.
Thanks.